Skip to content
A sheet of LED film bent into a wave, running colourful content
Self-Adhesive LED Film

Wrapped & Shaped Film.

Wrapped & Shaped Film

Glass that bends. Film that follows.

Min bend radius
300 mm
Measured thick
2.58 mm
Per panel
1.3 kg

Curved · Overview

Wrapped & Shaped Film overview

Bendable film for columns, cylinders, curved shopfronts and corner glazing that rigid cabinets simply cannot follow — with no custom framing bill.

Best for

Columns, cylinders, curved shopfronts and corner glazing.

See it by industry

At a glance

Min bend radius
300 mm
Measured thickness
2.58 mm, panel and adhesive together
Transparency
90–95% (P20 95% · P10 94% · P8 92% · P4 90%)
Weight
1–3 kg/m² (~1.3 kg per 1000 × 400 mm panel)
Pixel pitch
P4 – P20
Full specifications

Proof

Curved glass, off and on.

Curved glass, off and on.

Curved glass balustrades running transparent film. Drag the handle — the escalators, shopfronts and shoppers stay visible through the graphics the whole way across.

Film follows curves that rigid cabinets cannot — with no custom framing bill.

Mall atrium with curved glass balustrades, display switched off
The same mall atrium with transparent LED film on the balustrades showing flowing colour, architecture still visible through it

Drag the line, or use the arrow keys. Left of the line the display is off; right of it, on.

Your column, in numbers

Wrap your column.

Wrap your column.

Set the diameter and height: wrapped area, load, power — and a check against the film's 300 mm minimum bend radius.

Drawn to scale beside a 1.75 m person. Strip spacing is exaggerated so you can see it.

Your column

Pixel pitch

Wrapped area
85 ft²
Load on the glass
17–52 lb
Power, average
≈ 1.2 kW
Unwrapped run
9′ 5″
Canvas at P10
287 × 274 px
Closest comfortable view
≈ 33 ft

Bonded straight to the pane — no frame, no steel.

Indicative hardware

$11,600–$24,800

At published retail pricing ($137–293/ft²), before install and freight. An estimate, not a quote — your written spec replaces it.

Start a project
Self-adhesive transparent LED film panel bonded flat to glass showing its ultra-thin profile

What it is

Your glass becomes the screen.

Your glass becomes the screen.

Transparent LED film for glass laminates fine LED strips inside an optically clear layer with adhesive on the back. It goes on like a vehicle wrap — squeegee, no drilling, no structure — and panels splice side by side into any width, with one controller driving up to 45 of them.

  • No steel, no cabinet — typically a materially lower total project cost than framed transparent LED.
  • Landlord-friendly — removable adhesive, no load on the glazing, no permanent alteration.
  • Chain-ready — one cloud campaign pushed to every store window you operate.
Digital caliper measuring the millimetre-thin profile of transparent LED film

Engineering

Millimetres thin, broadcast bright.

Millimetres thin, broadcast bright.

Total build is 0.5–3 mm at 1–3 kg/m². Pitches run P4 for close viewing to P20 at 95% transparency, with 1,500–4,000 nit options and 16-bit greyscale at 3,840 Hz — clean on every phone camera pointed at the window.

  • A+B panel system interlocks into seamless runs with no visible join.
  • Bendable to wrap columns, curved shopfronts and cylindrical glass.
  • Strip-level service — a dead strip is a ten-minute swap, not a new screen.

Hold it in your hand

2.58 mm on the calipers. 1.3 kg on the scale.

2.58 mm on the calipers. 1.3 kg on the scale.

Every vendor claims their film is thin and light. These are measurements of the actual product, not renders.

  • Digital calipers clamped on a sheet of transparent LED film reading 2.58 millimetres, with the LED grid visible across the panel

    2.58 mm

    Measured thickness, panel and adhesive layer together — about three credit cards thick.

  • A rolled transparent LED film panel resting on a digital kitchen scale

    1.3 kg

    A full 1000 × 400 mm panel on the scale. That is 1–3 kg/m² hanging on your glass.

  • A strip of micro-mesh transparent LED film bent into an S curve, showing how flexible it is

    300 mm

    Minimum bend radius. It wraps columns and curved shopfronts that rigid cabinets cannot follow.

Specifications

The numbers that decide the deal.

The numbers that decide the deal.

P10 is the price and clarity sweet spot for 5–10 m viewing. Strips are factory-cut, so every project starts with a measured survey rather than a guess.

11 specifications

Wrapped & Shaped Film — full specifications
SpecificationValue
Min bend radius300 mm
Measured thickness2.58 mm, panel and adhesive together
Transparency90–95% (P20 95% · P10 94% · P8 92% · P4 90%)
Weight1–3 kg/m² (~1.3 kg per 1000 × 400 mm panel)
Pixel pitchP4 – P20
Brightness1,500–4,000 nits
Refresh / greyscale3,840 Hz · 16-bit
Power (average)~150 W/m²
Rated lifetime~100,000 h rated (L70, heat-managed)
ControlNovastar / Colorlight / Huidu — cloud, phone, USB
Warranty3-year manufacturer-backed cover (subject to terms), 5% spare strips stocked

Budget guidance

Installed packages on our U.S. price guide: P10 $297/ft² and P4 $427.35/ft², priced on finished display area with shipping, installation and three promo videos included; P8 and P20 are quoted per project. To test one window first, kits start at $389 for 240 × 600 mm and 400 × 1000 mm panels run $590–1,390. Stock sizes ship in 1–3 days, custom-cut projects run 20–25 business days from measurement.

CE / FCC / RoHS conformant hardware, an ISO 9001 supply chain and a written spec with every quote.

Download the PDF presentation

Why it wins

Where adhesive film beats every alternative.

Where adhesive film beats every alternative.
  1. Fastest install in LED

    Roughly five minutes per square metre with a squeegee: fitted before opening, live by lunch, with no shopfitting and no store closure.

  2. Rental-safe

    No drilling, no load, fully removable — the only LED screen a landlord will sign off without a structural report.

  3. Lowest entry cost

    $389 puts a working screen on one window. Prove the concept on your worst-performing store before you commit the whole estate.

  4. Curves welcome

    Wraps columns, corners and cylindrical glass that rigid cabinets cannot follow, with no custom framing bill.

  5. Measured, not guessed

    We survey the glass and order factory-cut strips to those dimensions — no site trimming, no improvised edges.

  6. Ten-minute repairs

    Strips swap individually with 5% spares held per project. A fault never takes the whole window dark for a shipping cycle.

Where it works

Made for interior and shaded glass.

Made for interior and shaded glass.

Built for any interior or shaded commercial glazing kept out of direct sun — which is most glass frontage.

  • Boutique storefronts
  • Mall shopfronts
  • Glass partitions
  • Automotive showrooms
  • Museum & exhibition cases
  • Office lobbies
  • Meeting-room glass
  • Hotel receptions
  • Chain retail estates
  • Pharmacy & clinic windows

Film on real glass.

Adhesive and mesh film across storefronts, malls, showrooms and building facades — shaded and interior glazing in every case.

Mall glass balustrade covered in adhesive transparent LED film showing vivid content
Mall balustrade — cloud-synced content
Mall interior with adhesive LED film on glass balustrades showing pink visuals
Atrium void — full-length run
Car showroom glass running a transparent LED film campaign
Automotive showroom glazing
Building facade glass with colourful LED film content
Architectural decoration
Commercial building at night with LED film advertising on the glass front
Night advertising — shaded facade
Transparent LED mesh film rolled into a loose cylinder
Ships in a roll — no crate, no frame
Two retail installations: a transparent screen hanging in a mall atrium and a free-standing transparent poster on a shop floor
Retail and hospitality formats

Install notes

From brief to switch-on.

From brief to switch-on.
  1. 01

    Measured survey

    We measure your glass and check sun exposure — the survey is included free with every quote.

  2. 02

    Factory-cut

    Stock kits ship in 1–3 days. Custom-cut runs take 20–25 business days from confirmed measurements, with the install slot booked at order.

  3. 03

    Squeegee on

    Roughly five minutes per square metre: fitted before opening, live by lunch, no shopfitting and no store closure.

  4. 04

    Run the estate

    One cloud CMS schedules every window by daypart, with 5% spare strips held per project for ten-minute swaps.

FAQ

What buyers ask first.

What buyers ask first

Something else? Email business@smartechllc.tech — we reply within one business day.

  • No. The optically clear adhesive is designed to be removable and the glass comes off clean. Re-using a removed panel is not guaranteed, so we plan panel sizes carefully up front rather than expecting to reposition later.

  • No — film is factory-cut only, because the driver strips and ribbon routing are laid out for a specific panel size. We measure your glass on the survey and order exact dimensions, which is included free with every quote.

  • We would not sell it to you for that. Direct sun degrades adhesive film — heat attacks the bond and the electronics, and screens throttle brightness when they get hot. For sun-exposed glass we quote behind-glass film on standoffs or framed mesh instead. Same floating effect, engineered for the heat, and it is the reason our film installs still look right at year five.

  • Strips are replaced individually, not as a screen. We stock 5% spares with every project so a swap takes minutes rather than a freight cycle. Panels are rated to 100,000 hours and carry three years of cover.

  • Stock kit sizes ship in 1–3 days and install in hours. Custom-cut projects typically run 20–25 business days from confirmed measurements to switch-on, and we book the install slot at order rather than after delivery.

  • Yes — that is the strongest use case. Every screen sits on one cloud CMS, so a campaign pushes to every window at once with scheduling by daypart and local override for store-specific promotions.

  • Yes, and it is the preferred surface. Film bonds to the inner pane so the outer pane takes the weather and the cavity helps thermally. We check pane thickness and any low-E coating on survey, because coatings affect both adhesion and perceived brightness.

Keep exploring

More from LED Film.

More from LED Film.

Same line first, then the rest of the range — every product specified to your space from San Diego, CA and our Lynnwood, WA showroom.

Start a project

Test it on one window for $389.

Test it on one window for $389.

Start with a plug-and-play kit. Scale to the whole estate when the footfall numbers prove it.

What you get back

Within one business day: recommended pitch, panel layout for your exact glass, load and power figures, and a fixed budget range — plus a straight answer if your window needs a different product.

Hours
Mon–Fri, 9am–5pm PT

Wrapped & Shaped Film

Start a project

15% off your first window

Leave your email or phone number and we'll send your welcome code.