Spliced Window Run.
Spliced Window RunOne window, wall to wall.
- Panels / controller
- 45
- Pixel pitch
- P4–P20
- Holes drilled
- 0
From $297/ft²P10 · installed
Storefront · Overview
Spliced Window Run overview
A+B panels interlocked across the full width of a shopfront, factory-cut to your measured glass and driven by a single controller. One cloud campaign pushes to every window you operate, scheduled by daypart.
Best for
Full shopfronts and chain estates that want one campaign on every window.
See it by industryAt a glance
- Transparency
- 90–95% (P20 95% · P10 94% · P8 92% · P4 90%)
- Thickness
- 0.5–3 mm (typically 2–2.5 mm)
- Weight
- 1–3 kg/m² (~1.3 kg per 1000 × 400 mm panel)
- Pixel pitch
- P4 – P20
- Brightness
- 1,500–4,000 nits
Proof
Wall to wall, off and on.
Wall to wall, off and on.One boutique frontage, photographed with the film switched off and switched on. Drag the handle and watch the mannequins stay visible the whole way across.
This is the test to run on any vendor: ask for the same window, same angle, off and on. Most cannot produce it.
Drag the line, or use the arrow keys. Left of the line the display is off; right of it, on.
Your glass, in numbers
Put it on your glass.
Put it on your glass.Drag to the size of your window and read the load, the power and an estimated price — worked out from this product's published pricing.
Drawn to scale beside a 1.75 m person. Strip spacing is exaggerated so you can see it; lines mark panel seams.
Your glass
Pixel pitch
Panel size
- Area
- 104 ft²
- Load on the glass
- 21–64 lb
- Power, average
- ≈ 1.4 kW
- 400 × 1000 mm · 1 controller
- 30 panels
- Canvas at P10
- 396 × 244 px
- Closest comfortable view
- ≈ 33 ft
Bonded straight to the pane — no frame, no steel.
Estimated package price · installed
$30,888
104 ft² × $297/ft² · P10Shipping, installation and 3 promo videos included. USD excl. tax · priced on finished display area · quote valid 30 days.
What it is
Your glass becomes the screen.
Your glass becomes the screen.Transparent LED film for glass laminates fine LED strips inside an optically clear layer with adhesive on the back. It goes on like a vehicle wrap — squeegee, no drilling, no structure — and panels splice side by side into any width, with one controller driving up to 45 of them.
- No steel, no cabinet — typically a materially lower total project cost than framed transparent LED.
- Landlord-friendly — removable adhesive, no load on the glazing, no permanent alteration.
- Chain-ready — one cloud campaign pushed to every store window you operate.
Engineering
Millimetres thin, broadcast bright.
Millimetres thin, broadcast bright.Total build is 0.5–3 mm at 1–3 kg/m². Pitches run P4 for close viewing to P20 at 95% transparency, with 1,500–4,000 nit options and 16-bit greyscale at 3,840 Hz — clean on every phone camera pointed at the window.
- A+B panel system interlocks into seamless runs with no visible join.
- Bendable to wrap columns, curved shopfronts and cylindrical glass.
- Strip-level service — a dead strip is a ten-minute swap, not a new screen.
Hold it in your hand
2.58 mm on the calipers. 1.3 kg on the scale.
2.58 mm on the calipers. 1.3 kg on the scale.Every vendor claims their film is thin and light. These are measurements of the actual product, not renders.
2.58 mm
Measured thickness, panel and adhesive layer together — about three credit cards thick.
1.3 kg
A full 1000 × 400 mm panel on the scale. That is 1–3 kg/m² hanging on your glass.
300 mm
Minimum bend radius. It wraps columns and curved shopfronts that rigid cabinets cannot follow.
Specifications
The numbers that decide the deal.
The numbers that decide the deal.P10 is the price and clarity sweet spot for 5–10 m viewing. Strips are factory-cut, so every project starts with a measured survey rather than a guess.
12 specifications
| Specification | Value |
|---|---|
| Transparency | 90–95% (P20 95% · P10 94% · P8 92% · P4 90%) |
| Thickness | 0.5–3 mm (typically 2–2.5 mm) |
| Weight | 1–3 kg/m² (~1.3 kg per 1000 × 400 mm panel) |
| Pixel pitch | P4 – P20 |
| Brightness | 1,500–4,000 nits |
| Refresh / greyscale | 3,840 Hz · 16-bit |
| Splicing | A+B panel system — one controller drives 38–45 panels |
| Strip length | Max ~1,450 mm standard, custom to 2,896 mm — factory-cut only |
| Power (average) | ~150 W/m² |
| Rated lifetime | ~100,000 h rated (L70, heat-managed) |
| Control | Novastar / Colorlight / Huidu — cloud, phone, USB |
| Warranty | 3-year manufacturer-backed cover (subject to terms), 5% spare strips stocked |
Budget guidance
Installed packages on our U.S. price guide: P10 $297/ft² and P4 $427.35/ft², priced on finished display area with shipping, installation and three promo videos included; P8 and P20 are quoted per project. To test one window first, kits start at $389 for 240 × 600 mm and 400 × 1000 mm panels run $590–1,390. Stock sizes ship in 1–3 days, custom-cut projects run 20–25 business days from measurement.
CE / FCC / RoHS conformant hardware, an ISO 9001 supply chain and a written spec with every quote.
Download the PDF presentationThe range
Four ways to buy it.
Four ways to buy it.Same technology, different commitment — start with one window and scale panel by panel.
01 · StarterPlug-and-play kit
240 × 600 mm or 400 × 1000 mm panel with controller and power supply in the box. The cheapest honest way to test transparent LED film on your own glass.
From $389 · ships 1–3 days
02 · StorefrontYou are hereSpliced window run
A+B panels interlocked across the full width of a shopfront, factory-cut to your measured glass and driven by a single controller.
Up to 45 panels per controller
03 · CurvedWrapped & shaped
Bendable film for columns, cylinders, curved shopfronts and corner glazing that rigid cabinets simply cannot follow.
Min bend radius 300 mm
04 · Large formatFacade-scale film
Wide-pitch film across multi-storey curtain walls for building-scale media — maximum transparency, minimum visual weight by day.
P10–P20 · shaded elevations only
Why it wins
Where adhesive film beats every alternative.
Where adhesive film beats every alternative.Fastest install in LED
Roughly five minutes per square metre with a squeegee: fitted before opening, live by lunch, with no shopfitting and no store closure.
Rental-safe
No drilling, no load, fully removable — the only LED screen a landlord will sign off without a structural report.
Lowest entry cost
$389 puts a working screen on one window. Prove the concept on your worst-performing store before you commit the whole estate.
Curves welcome
Wraps columns, corners and cylindrical glass that rigid cabinets cannot follow, with no custom framing bill.
Measured, not guessed
We survey the glass and order factory-cut strips to those dimensions — no site trimming, no improvised edges.
Ten-minute repairs
Strips swap individually with 5% spares held per project. A fault never takes the whole window dark for a shipping cycle.
Where it works
Made for interior and shaded glass.
Made for interior and shaded glass.Built for any interior or shaded commercial glazing kept out of direct sun — which is most glass frontage.
- Boutique storefronts
- Mall shopfronts
- Glass partitions
- Automotive showrooms
- Museum & exhibition cases
- Office lobbies
- Meeting-room glass
- Hotel receptions
- Chain retail estates
- Pharmacy & clinic windows
Spliced Window Run is best for
Full shopfronts and chain estates that want one campaign on every window.
Film on real glass.
Adhesive and mesh film across storefronts, malls, showrooms and building facades — shaded and interior glazing in every case.
Install notes
From brief to switch-on.
From brief to switch-on.- 01
Measured survey
We measure your glass and check sun exposure — the survey is included free with every quote.
- 02
Factory-cut
Stock kits ship in 1–3 days. Custom-cut runs take 20–25 business days from confirmed measurements, with the install slot booked at order.
- 03
Squeegee on
Roughly five minutes per square metre: fitted before opening, live by lunch, no shopfitting and no store closure.
- 04
Run the estate
One cloud CMS schedules every window by daypart, with 5% spare strips held per project for ten-minute swaps.
FAQ
What buyers ask first.
What buyers ask firstSomething else? Email business@smartechllc.tech — we reply within one business day.
No. The optically clear adhesive is designed to be removable and the glass comes off clean. Re-using a removed panel is not guaranteed, so we plan panel sizes carefully up front rather than expecting to reposition later.
No — film is factory-cut only, because the driver strips and ribbon routing are laid out for a specific panel size. We measure your glass on the survey and order exact dimensions, which is included free with every quote.
We would not sell it to you for that. Direct sun degrades adhesive film — heat attacks the bond and the electronics, and screens throttle brightness when they get hot. For sun-exposed glass we quote behind-glass film on standoffs or framed mesh instead. Same floating effect, engineered for the heat, and it is the reason our film installs still look right at year five.
Strips are replaced individually, not as a screen. We stock 5% spares with every project so a swap takes minutes rather than a freight cycle. Panels are rated to 100,000 hours and carry three years of cover.
Stock kit sizes ship in 1–3 days and install in hours. Custom-cut projects typically run 20–25 business days from confirmed measurements to switch-on, and we book the install slot at order rather than after delivery.
Yes — that is the strongest use case. Every screen sits on one cloud CMS, so a campaign pushes to every window at once with scheduling by daypart and local override for store-specific promotions.
Yes, and it is the preferred surface. Film bonds to the inner pane so the outer pane takes the weather and the cavity helps thermally. We check pane thickness and any low-E coating on survey, because coatings affect both adhesion and perceived brightness.
Keep exploring
More from LED Film.
Same line first, then the rest of the range — every product specified to your space from San Diego, CA and our Lynnwood, WA showroom.
No drillingLED Film
Self-Adhesive LED Film
Peel. Stick. Broadcast.
From $297/ft²
FlagshipHolographic & Transparent
Transparent LED Mesh Panels
Invisible when off. Unmissable when on.
From $232/ft²
Broadcast-safeVideo Walls
Fine-Pitch COB Video Walls
Every pixel. Perfectly placed.
Conference walls $50–120K turnkey
Bends to curvesHolographic & Transparent
Holographic Flexible Film
Content that floats in the glass.
From $357.68/ft²
Start a project
Test it on one window for $389.
Test it on one window for $389.Start with a plug-and-play kit. Scale to the whole estate when the footfall numbers prove it.
What you get back
Within one business day: recommended pitch, panel layout for your exact glass, load and power figures, and a fixed budget range — plus a straight answer if your window needs a different product.
- Phone
- +1 (858) 299-1959
- Hours
- Mon–Fri, 9am–5pm PT
Spliced Window RunFrom $297/ft² P10 · installed
Start a project